- Model: #F E4OD / 4R100
- Shipping Weight: 21 lbs
- Manufactured by: Mag-Hytec
WARNING: Cancer and Reproductive Harm
Overall height 6 1/8″
1990 to 2003 F150, F250, F350, F450, F550, F650 Trucks, Vans, Motor homes, and Excursions. See note for Excursion….
All 7.3 Liter Diesels to 2003
All V10 Gas to 2004 (until 3 valve V10), 2004 Lightning and Vans
Holds 7.6 quarts more fluid than stock pan
Includes: Bolt kit, and Drain Plug.
Attention: All transmission pans purchased Retail, direct from MAG-HYTEC.COM, include the correct filter.
If you purchase through another source, it is up to them if they include the filter with your purchase.
Extra filters are also available for your convenience.
Attention: See Service Bulletin For Leaking Issues in the: “Install Tab” Service Bulletin F5R110 / 4R100 in the right hand column.
Attention EXCURSION Owner:
This application will require some modifications of the transmission cross member. There are many different ideas and each will have it’s merits and difficulties.
My suggestion would be to slot the bolt holes on the cross member to allow it to move toward the rear of the truck for clearance. (NOT THE FRAME, but the cross member) The #F4R100 pan will bolt onto the transmission and then you will see how long you will need to make the slots.
Some others have cut a relief in the cross member (Not my favorite idea.) Also some have ground the fins down on the pans, and cut the cross member, this is not the worst idea but again whatever will work should be looked at.
This will be a project requiring tools and skills that are advanced.
|Dimensions||21 × 14 × 6.5 in|
|1/2, 3/4, or 1 Ton or Higher||
1 Ton or Higher, 3/4
|4X2 / 4X4||
|Auto / Stick||
|Diesel / Gas||
|Single or Dual Rear Tires||
|Truck, Van, Motorhome||
Motorhome, Truck, Van